Setting Up A Home Security System Is This Easy – Arlo Pro 2

Written by on

DIY Home security systems have become increasingly popular over the last few years. All-in-one systems like the Arlo Pro 2 make it easy for anyone to set-up surveillance for their home. This popular Arlo system is wire-free, with 1080p HD video, audio support, night vision, local back up storage, 130-degree wide angled lenses, all connected with a handy app accessible straight from your phone.

So to show you just how easy it is to get things set up, we’ve produced a simple three-step guide to run you through the installation of this great product.

The packaged security system contains:

  • The base station
  • Base Station power adapter
  • Ethernet cable
  • Mounting screws
  • Magnetic wall mount
  • Rechargeable battery
  • Camera power adapter cable
  • Arlo pro camera

 

NETGEAR VMS4330P-100EUS Arlo Pro 2 – 3 Camera Security System  only £697.08 on Flubit.comBrief DescriptionArlo Pro 2 is the most powerful and easy to use wire-free security camera ever thanks to its 1080p video,…Go to Product

 

 

How to Install

  1. Power up

The first step is to insert the battery into the back of each camera included in the system. The base station then needs an internet connection, so connect your router to the base unit using the provided ethernet cable. Finally, connect the base to some power before you power it on. Patiently wait for the middle and left light to turn green to signal that the unit is ready for the next step.

p.s. Download the Arlo app and follow the given instructions for secure access to your cameras

 

  1. Get in sync

Now to sync the camera(s) to the base station. Do this by bringing them close together and pressing the top button on the base station for 3 seconds. Wait for the light on the right to flash green, then hold the button on the top of the camera for about 3 seconds. When the blue light flashes rapidly, the sync is complete.

Tip: if camera syncs and the light is orange, try syncing it again.

 

  1. Finale

Install your camera sensors in desired locations. It’s recommended to place your camera looking down on your chosen locations. Don’t forget to use the handy magnetic wall mounts included in the pack!

And with that, you’re installation is complete. Cameras can be used both indoors and outdoors with a maximum of 15 cameras per system. All recorded videos in a given time span will be available on the app and online with your login.

Check out our full range of home security tools and helpful tips today at Flubit.com.

Share this post:

Comments

comments

Comments are closed.